Applications

WR-31 can be used in following applications:

• Any wooden work for kitchen, wall, terrace, bathroom, etc., where water exposure is high
• For all type of wood of cold press and hot press
• For bonding in all types of wood working like plywood, wood, laminates, veneers, particle boards, block board/hard board, MDF with each other
• Furniture, handicraft, sports goods, packaging and book binding, paper labelling, paper tube, wall paper, carpet manufacturing
• Also recommended for bonding any two material where at lese one of them is porous eg. Paper, card board, particle board, etc. and other related applications

Advantages

• High initial grab
• Single component ready to use
• Economical in the long run
• 48 hrs continuous water resistance
• 6 hr boiling water resistance
• Gives higher coverage
• Eco-friendly with low odour
• Good spread-ability

How to use

WR-31 has very good spread-ability and can be apply with the helP, of brush, roller or fingers. The usual procedure to be followed is:

• Clean both the surfaces to be bonded
• It is ready to use product so dilution is not recommended
• Apply a thin coat of WR-31 on both or one surface – as per requirement and spread evenly in 5-10 minutes
• Press the two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support, etc., till the adhesive dries completely. Excess adhesive pressed outside the joints should be wiped out with a wet cloth

Shelf Life

12 months in a partially filled packing and strictly store in a cool place, away from heat.

INNFIX PV RG 42

Applications

PV RG 42 can be used in following applications:

• For bonding of all type of wood working like plywood, wood, laminates, veneers, particle board, block board/hard board, MDF to each other
• Furniture, handicraft, sports goods, packaging & book binding, paper labelling, paper tube, wall paper, carpet manufacturing
• Also recommended for bonding any two materials where at lese one of them is porous eg. Paper, card board, particle board etc. and other related applications

Advantages

• Single component ready to use
• Economical in long run
• Unsurpassed bonding strength
• Resistance to water and heat
• Gives higher coverage
• Eco-friendly with low odour
• Good spreadability

How to use

INNFIX PV RG 42 has very good spreadability and can be applied with the help of the applicator, by brush, roller or fingers. The usual procedure to be followed is:

• Clean both the surfaces to be bonded
• It is ready to use product so dilution is not recommended
• Apply a thin coat of RG-42 on both or one surface – as per requirement and spread evenly in 5-10 minutes
• Press the two surfaces together and keep under pressure with the help of either a clamp, nails, wooden support etc., till the adhesive dries completely. Excess adhesive pressed outside the joints should be wiped out with a wet cloth

Shelf Life

12 months in a partially filled packing and strictly store in cool place, away from heat.

INNFIX PV MC

Application

• Medium budget adhesive developed for pasting decorative laminates, furniture joining, lamination on MDF or particle board, etc.

INNFIX PV SC

Application

• Low Cost budget adhesive developed for pasting decorative laminates, furniture joining, lamination on MDF or particle board, etc.

INNFIX PV HC

Application

• Specially developed product for woodworking industry.

• A very versatile product – finds application in pasting laminates, fixing joints in the process of making furniture’s etc.

INNFIX STICKER GRADE ADHESIVES

CHEMTECH produces emulsions for various adhesive applications such as:

• i. BOPP Tape adhesive.
• ii. Wet laminations of paper board to films like BOPP, Polyester & PVC.
• iii. Stickers and labels with pressure sensitive effect.
• iv. Various packaging adhesives for hand and machine application.
• v. Pencil making.
• vi. Other miscellaneous applications.